Home Our Products
Our Profile catalogue

Contact Us

Our News  


Analog Trainer


 

 ›› Technical Specifications:
 
1- Solderless Breadboard.
Interconnected with 2520 tie points nickel plated contact, fitted all DIP sizes and all components with lead and solid wire.
2- DC Power Supply:
  (A) Fixed DC output: +5V, 1A.
(B) Fixed DC output: -5V, 300mA.
(C) Variable DC output: 0V ~ +15V, 500mA.
(D) Variable DC output : 0V ~ -15V, 500mA.
3- Potentiometers:
  (A) Variable resistor VR1 = 1KΩ (B).
(B) Variable resistor VR2 = 100K Ω (B).
Model: II-I-1011
4- Function Generator:
 
(A) Frequency Range : 1Hz ~ 10Hz.
  10Hz ~ 100Hz.
100Hz ~ 1KHz.
1KHz ~ 10KHz.
10KHz ~ 100KHz.
(B) Amplitude Sine wave output: 0-8Vp-p variable.
  Triangle wave output: 0-6Vp-p variable
Square wave output: 0-8Vp-p variable
TTL mode output: 0- +5V.
5- Eight bits data switches:
8 pcs toggle switches and corresponding output point. When switch is set at down position, the output is LO level; contrarily, it is to be HI level while setting at up position.
6- Speaker:
2- ˝ inch diameter, 8 Ω/0.25 W to be used for load.
7- Four channel adapter:
Both of the two banana sockets’ and two BNC jacks’ point tips are changeable.
8- Two pulse switch (with 2 set of outputs):
8 pcs toggle switches and corresponding output point. When switch is set at down position, the output is LO level; contrarily, it is to be HI level while setting at up position.

Copyrights for  international interactive, Developed and Designed by SENECA ltd, Powered by Dotformatics