Home Our Products
Our Profile catalogue

Contact Us

Our News  


Four Filtering Grades


 

Friulair designed 4 types of filters with different filtering grade to meet the most demanding needs.


ACOMP SERIES P-5 MICRON
This filter is able to hold emulsion and solid particles up to 5 micron. It is usually installed at the inlet of dryers. It is ideal as a pre-filter line elements (series S-X-Z), vacuum pumps, pneumatic blow systems, post-filters for absorption dryers.

ACOMP SERIES S-1 MICRON
This filter can remove solid partials up to 1 micron, including liquids and oil. Maximum content of residual oil 0.1 ppm. Normally it is used at the outlet of dryers as pre-filter for X grade elements. It is used to prevent the deterioration of tubes in compressed air systems, superficial treatments, vacuum pumps drain, compressed air motors, pre-filter for absorption dryers.

ACOMP SERIES X-0.01 MICRON
Oil separating filter used to remove oil residues and particles with a minimum diameter of 0.01 micron maximum content of residual oil 0.01 ppm. It delivers technically oil free air. It is used to protect control systems, pneumatic feeding systems, painting systems,  pre-filter for absorption dryers.



 

 

ACOMP SERIES Z-Activated Carbon
Activated separating filter used to eliminate vapor and oil smell, An X grade pre-filter is stalled before the filter, thus reducing the maximum content of residual oil to 0.03 ppm. It is used in pharmaceutical industries, dental application, photo laboratories, packing, and galvanic treatment.

Replacing Filtering Cartridges

Estimated life cycle:
P,S,X series: 2000 hours, 12 max months or earlier if the differential pressure reaches 0.6 bar.
Z series
400 hours.

 


 

1. Air Compressor
2. Tank
3. LFP Pre- Filter
4. By- Pass
5. Refrigeration Dryer
6. LFS Series Filter
7. Oil Removing Filter Series LFX
8. Activated carbon Filter Series LFZ
9. Condensate Drain
 

Technical Data & Dimensions


 

Model Flow Rate Fittings Pressure Diameter Filtering Element
  m3/h l/min cfm Diameter bar (max) A x B mm

Kg

 
ACOMP-0580 33 550 19 1/2" 16 77x175 0.7

1 x F* 006

ACOMP-0590 72 1200 42 3/4" 16 95x170 0.9

1 x F* 012

ACOMP-0600

108 1800 64 3/4" 16 95x200 1.1

1 x F* 018

ACOMP-0610

138 2300 81 3/4" 16 95x225 1.2

1 x F* 023

ACOMP-0620

228 3800 134 1" 16 95x265 1.3

1 x F* 039

ACOMP-0630

270 4500 159 1.1/4" 16 133x260 2.6

1 x F* 045

ACOMP-0640

366 6100 215 1.1/4" 16 133x320 3.0

1 x F* 061

ACOMP-0650

588 9800 346 1.1/2" 16 135x380 3.8

1 x L* 100

 

LF Series

 

 

Bar Fatt.
1 0,25
2 0,4
3 0,5
4 0,65
5 0,75
6 0,9
7 1
8 1,15
9 1,25
10 1,4
11 1,5
12 1,6
13 1,75
14 1,85
15 2
16 2,1

Correction factor for operating pressure changes.

 
Model Dimensions
    mm

ACOMP

0586 12
ACOMP 0590 15
ACOMP 0600 15
ACOMP 0610 15
ACOMP 0620 30
ACOMP 0630 35
ACOMP 0640 35
ACOMP 0650 35

Useful Dimensions for the replacement of the element.

Condensate Drain Sleeve: 1/2" BS-F.

* = Filtering Grade       P = 5 micron       S = 1 micron      X = 0.01  micron      Z = Activated Carbon

Copyrights for  international interactive, Developed and Designed by SENECA ltd, Powered by Dotformatics